0845 601 1266
product services

What are the types of maintenance?

Pre Planned Maintenance (PPM) can be defined as an equipment maintenance strategy based on assessing its operational performance & function testing at fixed intervals regardless of its condition.

Scheduled operational cycle reporting is an example of preventive maintenance tasks, as highlighted below, which form part of our equipment-specific checklists:

  • Operational safety inspection
  • Electrical inspection
  • Mechanical inspection
  • Hydraulic inspection
  • Equipment function test
  • Asset condition assessment

Equipment-specific maintenance

pre-planned maintenance

Preventative Maintenance

Carried out before a breakdown or failure of equipment occurs – operational inspection checklists can identify areas such as:

  • Fault-finding
  • H&S risks
  • Condition reporting – grading of equipment based on usage and/or application

Remedial Maintenance

Carried out after a breakdown or failure of equipment occurs & can be identified as:

  • Deferred – source of breakdown or failure identified with equipment made operational, but root cause not addressed due to downtime affecting core business activity and/or cost due to budgetary constraints.
  • Emergency/H&S Related – usually occurs due to an H&S event or a catastrophic failure of the equipment that causes a major impact on the core business activity, which invariably has unforeseen cost issues.

When carrying out preventive maintenance, we are performing a task before a failure has occurred. That task can be aimed at preventing a failure, minimising the consequences of the failure or assessing the risk of the failure occurring.

When we are conducting remedial maintenance, the failure has now occurred, and we are basically reinstating equipment functionality.

EQUIPMENT – Servicing, Maintenance & Repair (SMR)

Somethings you may know or would like to know about SMR:

Risk Based Maintenance

Risk Based Maintenance

Driven by the business core activity & the role that equipment plays in that core activity, non-performance of equipment that has a higher risk and a very high consequence of failure would be subject to more frequent maintenance and inspection.

Low-risk equipment may be maintained at a much lower frequency and possibly with a much smaller scope of work.

Fault Finding Maintenance

Fault Finding Maintenance

Fault-finding maintenance tasks are aimed at detecting hidden faults that can be detected by operational performance & function testing reported on inspection checklists.

It’s important to realise that fault-finding maintenance tasks do not prevent failure, but simply detect it; once detected, the cause of failure should be repaired.

Remedial Maintenance

Remedial Maintenance

A remedial maintenance strategy only restores the function of equipment after it has been allowed to fail. It is based on the assumption that the failure is acceptable. (i.e. no significant impact on safety or the environment) and preventing failure is either not economical or not possible.

When adopting remedial maintenance as a strategy, it is essential to ensure that the failure modes under consideration do not have the potential to become Emergency/H&S related maintenance.

Emergency/H&S Related Maintenance

Emergency/H&S Related Maintenance

Emergency maintenance is corrective maintenance that is so urgent that it can have a major impact on the core activity of your business, as it can cause change of plans & schedules & can be costly.

Preventative maintenance can identify potential areas of remedial maintenance to minimise emergency maintenance, particularly if H&S related.

What regulations place a duty on employers to maintain and inspect work equipment?

The duty to maintain work equipment (PUWER regulation 5) and take measures to manage the risks from maintenance (PUWER regulation 22) builds on the general duties of section 2 of the Health and Safety at Work Act. Which requires work equipment to be maintained so that it is safe, and work to be undertaken safely, so far as reasonably practicable.

Which law regulates the use of work equipment?

PUWER requires that equipment provided for use at work is: suitable for the intended use, safe for use, maintained in a safe condition and inspected to ensure it is correctly installed and does not subsequently deteriorate.

What you must do?

In order to ensure work equipment does not deteriorate to the extent that it may put people at risk, employers, the relevant self-employed and others in control of work equipment are required by PUWER to keep it ‘maintained in an efficient state, in efficient order and in good repair’. If you are self-employed and your work poses no risk to the health and safety of others, then health and safety law may not apply to you. HSE has guidance to help you understand if the law applies. Such effective maintenance can not only help in meeting PUWER requirements but can also serve other business objectives, such as improved productivity and reduced environmental impact.

The frequency and nature of maintenance should be determined through risk assessment, taking full account of:

  • the manufacturer’s recommendations
  • the intensity of use
  • operating environment (e.g. the effect of temperature, corrosion, weathering)
  • user knowledge and experience
  • the risk to health and safety from any foreseeable failure or malfunction

Safety-critical parts of work equipment may need a higher and more frequent level of attention than other aspects, which can be reflected within any maintenance programme. Breakdown maintenance, undertaken only after faults or failures have occurred, will not be suitable where significant risk will arise from the continued use of the work equipment.

Who can undertake maintenance of work equipment?

To ensure the safety, compliance, and operational efficiency of waste compaction equipment, maintenance must be carried out by designated personnel with appropriate levels of responsibility and expertise. This guidance is designed to align with UK standards, including the Provision and Use of Work Equipment Regulations 1998 (PUWER).

1. Daily Checks – Site Operatives
– Role: Site operatives should perform daily inspections to confirm that waste compaction equipment and surrounding areas are safe, clean, and free from hazards.
– Tasks: These checks include ensuring general housekeeping standards are maintained, verifying there is no visible damage, and confirming that the equipment is safe to use.
– Training Requirement: Site operatives should receive basic training on safe operation and housekeeping practices specific to waste compaction equipment. Equipserv UK provides full training for site staff to competently perform these daily checks.

2. Weekly Checks – Site Maintenance Personnel
– Role: Site maintenance personnel should undertake more thorough weekly inspections to assess the overall condition of the equipment.
– Tasks: Weekly checks may involve examining mechanical components, performing lubrication where needed, and addressing any minor maintenance issues.
– Training Requirement: Personnel conducting weekly checks should be trained in equipment maintenance, with an understanding of the basic mechanical and safety aspects of the equipment. Equipserv UK offers comprehensive training for weekly checks to ensure personnel can identify potential issues and maintain equipment safety standards.

3. Repairs and Servicing – Qualified and Competent Engineers
– Role: Repairs and servicing should only be carried out by qualified engineers who are competent to undertake these tasks in line with PUWER requirements.
– Tasks: Engineers are responsible for performing any necessary repairs, replacing components, and conducting comprehensive servicing to ensure safe operation. They must be able to identify and rectify any issues that could impact safety or compliance.
– Qualification Requirement: Engineers should hold relevant qualifications and experience with waste compaction equipment. They must be competent in conducting in-depth inspections, servicing, and repairs to maintain compliance with PUWER and other applicable UK safety regulations.

By adhering to these guidelines, organisations can help to maintain the safety and efficiency of waste compaction equipment, ensuring compliance with UK health and safety legislation. Equipserv UK offers full training support to empower site staff with the knowledge needed for effective daily and weekly maintenance checks.